Cold Process Sheer Blush (Sienna)

Author Image

By: TOM BRANNA

Editor

Cold Process Sheer Blush (Sienna)
Ingredients
%

Phase A

  • Di H20
  • 79.78

0

  • Red Iron Oxide LC 381 (Sensient)
  • 1.75
  • Yellow Iron Oxide LC 181 (Sensient)
  • 0.15
  • Black Iron Oxide LC 989 (Sensient)
  • 0.05
  • Titanium Dioxide-Kowet (Sensient)
  • 0.05
  • Fragrance
  • q.s.

Phase B

  • Hydresia G2 (Botaneco) (Carthamus tinctorius (Safflower) oleosomes (and) glycerin (and) water)
  • 12.00

Phase C

  • Natrulon H-10 (Lonza) (Polyglycerin-10)
  • 5.00

Phase D

  • Aristoflex AVC (Clariant) (Ammonium acryloyldimethyltaurate/VP copolymer)
  • 1.10

Phase E

  • Preservative
  • q.s.

Phase F

  • Sodium hydroxide
  • q.s.

Procedure

Mix phase A under high sheer homogenizer recommended) until dispersed.     Using a propeller blade, mix phase B on low speed (300rpm) for 5 minutes.     Add phase C to phase A and mix for additional 1 minute.     Slowly add phase A  to phase B and increase blade speed to 800 rpm     to emulsify. Mix for 8-10 minutes.     Slowly add phase D (thickener) to batch and mix @ 800 rpm until smooth (appox. 8-10 minutes). Add preservative and mix @ 300 rpm for 1 minute.   Adjust PH to 6.5 using NaOH.

More Information

Botaneco Inc., 3430 Progress Drive, Suite B, Bensalem, PA 19020
(215) 604-0634,  Website: www.botaneco.ca